Pressure Control Module - Syrris - Control Reaction Pressure

These modules automatically controls the dosing of gas into and out of the reactor to control the pressure within the reactor. It is an ideal upgrade from manual pressure control and can be used with a gas feed to Syrris high pressure systems.

The pressure control module has 3 modes of operation:

1. Set Min Pressure and Max Pressure - In this mode the inlet valve is opened if the pressure drops below the Min Pressure and opens the outlet valve if the pressure is above Max Pressure. The Gas Pressure Control Module will automatically maintain the pressure within the set range
2. Vent - This closes the inlet valve and opens the outlet valve.
3. Purge - This opens both the inlet and outlet valves.

The Pressure Control Module can be controlled from the twist and click knob or can be connected to a PC via an Atlas Port and controlled by the Software. Valves are manufactured from 316L stainless steel.

There are 2 Pressure Control Modules:

• 200 Bar Gas Pressure Control Module (100 Bar with H2) an ideal addition to the Syrris 200 bar pressure Reactors, such as the Atlas Sodium Pressure system.
• 3 Bar Gas Pressure Control Module an ideal addition to the Atlas Potassium Pressure and High Pressure Globe systems

Both modules have been used as part of a custom reactor system, for CRS case studies please download our Batch Products Catalogue.