Africa Full System - Syrris - Fully Automated Flow Synthesis

Flow rate 2.5ul to 2.5ml/min with pressure sensors and automatic over-pressure shutdown

Regulated 1 bar Nitrogen or Argon is supplied to up to 4 bottles, eliminating cavitation and bubble formation and allowing the use of air sensitive reagents (requires laboratory gas supply).

The RIM allows reagents stored on the robot deck to be automatically aspirated and loaded into one of 4 injection loops. The robot has a coaxial needle allowing the use of air sensitive reagents in vials. All timings are automatically managed, even for complex, multi-reactor systems. Samples are pre-pressurized before injection into the flowing stream.

All wetted parts are glass, PTFE or other similar fluoropolymer.

The Africa Heater/Cooler has two reaction positions, each of which can be factory set to either:

• 0°C – 150°C
• 40°C – 250°C

Flow extraction and separation of an extremely wide range of immiscible solvent pairs e.g. DCM:Aq, Ethyl Acetate:Aq, THF:Aq, Ether:Aq etc. (where Aq is aqueous).

The Sampler and dilutor takes a 5ul sample from the flowing stream, dilutes it by up to 250 fold and injects it onto an analytical system e.g. HPLC, LCMS, UPLC etc.

The Africa HPLC allows integrated synthesis conditions an HPLC traces.

Each different reaction is automatically collected in a different