Africa Synthesis and Analysis System - Syrris - HPLC Analysis

Flow rate 2.5µl to 2.5ml/min with pressure sensors and automatic over-pressure shutdown

Regulated 1 bar Nitrogen or Argon is supplied to up to 4 bottles, eliminating cavitation and bubble formation and allowing the use of air sensitive reagents (requires laboratory gas supply).

1ml, 5ml or 10ml loops

The RIM allows reagents stored on the robot deck to be automatically aspirated and loaded into one of 4 injection loops. The robot has a coaxial needle allowing the use of air sensitive reagents in vials. All timings are automatically managed, even for complex, multi-reactor systems. Samples are pre-pressurized before injection into the flowing stream.

All wetted parts are glass, PTFE or other similar fluoropolymer.

The Africa Heater/Cooler has two reaction positions, each of which can be factory set to either:

• 0°C – 150°C
• 40°C – 250°C

The Sampler and dilutor takes a 5µl sample from the flowing stream, dilutes it by up to 250 fold and injects it onto an analytical system e.g. HPLC, LCMS, UPLC etc.

The Africa HPLC allows integrated synthesis conditions an HPLC traces.

The Africa software allows an almost unlimited number of reactor configurations and automates the entire process. Only “chemist friendly” data such as volumes, times and temperatures need to be added – no need to deal with flow rates if you don’t want to. The timings of all events such as pumps starting, injections, collections etc. are all automatically calculated and performed automatically.