Africa Synthesis and FLLEX System - Syrris

Flow rate 2.5µl to 2.5ml/min with pressure sensors and automatic over-pressure shutdown

Regulated 1 bar Nitrogen or Argon is supplied to up to 4 bottles, eliminating cavitation and bubble formation and allowing the use of air sensitive reagents (requires laboratory gas supply).

1ml, 5ml or 10ml loops

All wetted parts are glass, PTFE or other similar fluoropolymer.

The Africa Heater/Cooler has two reaction positions, each of which can be factory set to either:

• 0°C – 150°C
• 40°C – 250°C

Flow extraction and separation of an extremely wide range of immiscible solvent pairs e.g. DCM:Aq, Ethyl Acetate:Aq, THF:Aq, Ether:Aq etc. (where Aq is aqueous).

The Africa software allows an almost unlimited number of reactor configurations and automates the entire process. Only “chemist friendly” data such as volumes, times and temperatures need to be added – no need to deal with flow rates if you don’t want to. The timings of all events such as pumps starting, injections, collections etc. are all automatically calculated and performed automatically.