Reagent Pump - Africa Flow Chemistry Modules - Syrris

Each pump module has 2 flow channels. This enables 2 independent continuous flows of substrate/reagent to be pumped into the reactor between 4µl and 2500µl per minute. All the wetted parts are chemically resistant (glass & PTFE) and are user replaceable.

Africa Pump modules are high precision pumps, designed to deliver precise continuous flow of reagents and solvents to the Microreactor module

• Each pump has 2 independent channels
• Up to 4 Pump Modules can be used on a single Africa system, giving up to 8 channels
• Each channel has a pressure sensor to detect and avoid chip blockage or excessive flow rate
• Channels can be routed directly to the Microreactor or Reagent Store
• Precision syringe drives with a range of syringe sizes available
• Flow rate in the range 2.5µl/min to 2.5ml/min
• Any time/ flow profile can be programmed
• Reaction time, temperature and equivalents can be rapidly varied using mg of substrate.
• Extremely quick reaction times, reagent additions, temperature changes and quenches are possible.
• Pressure sensors continually monitor every flow channel.
• Flow rate accuracy is better than 1%
• Maximum pumping pressure 20 bar
• All wetted parts are made from glass or PTFE and are user cleanable and replaceable

Click here to download product information or contact us.