Asia Automator - Asia Flow Chemistry Modules - Syrris

The Asia Automator enables automated flow chemistry experiments, controlled either by the Asia Syringe Pump (e.g. 210, 220 or 310 systems) or the Asia Manager PC Software (e.g. 230, 320 or 330 systems).

Controlling a system from the Asia Syringe Pump:

The Asia Automator connects to the Asia Syringe Pump (2200292), via its USB port. The Asia Automator also connects to an Asia Product Collector (2200534) or Asia Automated Collector (2200562) and up to 4 other modules. Parameters such as pressure, temperature, molar ration, residence time and collection volumes are set up for each experiment on the Asia Syringe Pump which will then run the experiments automatically.

Controlling a system from a PC:

By connecting the Asia Automator and the Asia pump to a PC via USB, it is possible to control the Asia system using Asia Manager PC software (2200537). This allows to easily set-up any fluidic system, design a list of experiments and run them successively while monitoring data in real-time.

Connections:

• 1 x USB B Port for Asia Syringe Pump or PC
• 4 x Module Ports for modules such as:
• Asia Reagent Injector
• Asia Chip Climate Controller
• Asia Heater
• Asia Pressure Controller
• 1 x Collector Port for modules such as:
• Asia Product Collector
• Asia Automated Collector

*Minimum modules required for use with automated systems controlled from the Asia Syringe Pump:

• 1 x Asia Automator
• 1 x Asia Syringe Pump
• 1 x Asia Reagent Injector, Asia Chip Climate Controller, Asia Heater, Asia Pressure Controller, Asia Product Collector or Asia Automated Collector

*Maximum modules possible when using system control from Asia Syringe Pump:

• 1 x Asia Automator
• 1 x Asia Syringe Pump
• 1 x Asia Reagent Injector
• 1 x Asia Chip Climate Controller or Asia Heater
• 1 x Asia Pressure Controller
• 1 x Asia Product Collector or Asia Automated Collector